Stainless Steel Enclosure
video

Stainless Steel Enclosure

The advantages of the stainless steel distribution box enclosure stem from its material properties. Compared with materials such as ordinary cold-rolled steel sheets, the STAINLESS STEEL ENCLOSURE has extremely strong corrosion resistance. It is not easy to rust in humid, dusty, or even slightly acidic and alkaline environments, which greatly prolongs its service life and reduces the frequency and cost of replacement. The high-strength characteristics of the STAINLESS STEEL ENCLOSURE make it excellent in impact resistance and deformation resistance, which can better protect internal components in cases of collision, extrusion, etc., and reduce maintenance costs. Moreover, the stainless steel material is environmentally friendly and non-toxic, and will not fall off or release harmful substances like some coated materials, making it safer and more reliable.
Send Inquiry

Description

Technical Parameters

Product introduction

 

1. The core function of the stainless steel distribution box enclosure is to provide comprehensive protection for internal electrical components. The STAINLESS STEEL ENCLOSURE can effectively block the intrusion of external dust, rainwater, moisture, etc., avoid damage to components caused by these factors, and ensure the stable operation of the electrical system.

2. The stainless steel distribution box enclosure mainly uses 304 stainless steel. 304 stainless steel contains about 18% chromium and 8% nickel, which has good corrosion resistance, heat resistance, and mechanical strength, and can cope with most conventional environments.

3. The stainless steel distribution box enclosure can adapt to various complex environments and can be applied in multiple scenarios:

- In humid environments, such as basements and around bathrooms, the moisture resistance of the STAINLESS STEEL ENCLOSURE can prevent the enclosure from rusting and ensure the normal operation of internal components;

- In dusty environments, the smooth surface of the STAINLESS STEEL ENCLOSURE is not easy to accumulate dust, making cleaning simple and reducing the impact of dust on components;

- In environments containing corrosive media, such as chemical plants and seaside areas, the 304 stainless steel enclosure can effectively resist corrosion;

- In high-temperature environments, such as near boiler rooms, it can also maintain stable performance and will not fail due to excessive temperature.

 

Product Advantages

 

The advantages of the stainless steel distribution box enclosure are very prominent.

● In terms of corrosion resistance, the stainless steel material can resist the erosion of various substances such as air, water, acids, and alkalis. Even in humid, dusty, or slightly corrosive environments, it can maintain structural stability for a long time, is not easy to rust and damage, and its service life is far longer than that of distribution box enclosures made of ordinary materials.

● In terms of strength and toughness, the STAINLESS STEEL ENCLOSURE has high strength and good toughness, can withstand a certain amount of pressure and impact, is not easy to deform or break, and can effectively protect internal electrical components.

● In terms of high-temperature resistance, the stainless steel distribution box enclosure can work normally in relatively high-temperature environments and will not degrade or be damaged due to excessive temperature.

● In addition, the surface of the STAINLESS STEEL ENCLOSURE can undergo various treatments, such as wire drawing and polishing, making the enclosure not only have excellent performance but also have an attractive appearance, which can coordinate with the surrounding environment.

 

Technical Parameters

 

Material

Galvanized steel sheet (iron sheet), stainless steel

Surface Treatment

The surface is treated with epoxy resin electrostatic spraying, which has high anti-corrosion performance, and is beautiful and durable

Configuration

Front door, back plate, mounting plate, cabinet body, sealing strip, door lock, side plate, lifting lug (optional)

Installation Method

Floor installation

Color

RAL7031 or RAL7035 (optional)

Material Thickness

Door panel: 2.0mm, back plate and side plate: 1.5mm, mounting plate: 2.5mm (optional)

Resistance to Mechanical Impact

IK10

Temperature Range

-40~+80 degrees

 

High-Quality Manufacturing Process

 

In the production process of distribution box enclosures, numerical control production equipment plays a vital role, bringing many significant advantages to the products.

1. High precision: Relying on internationally advanced numerical control production equipment, we endow the manufacturing of distribution box enclosures with significant advantages. The use of high-precision CNC laser cutting machines, with a cutting accuracy of ±0.1mm, can accurately carve complex openings, bending lines, and heat dissipation holes, ensuring that internal components are installed tightly;

2. Small bending angle error: With the CNC bending machine, the bending angle error is controlled within ±0.5°, making the box edges sharp and the structure stable, avoiding dimensional deviations and deformation caused by traditional manual processing;

3. Mass production in batches, short delivery time: In terms of mass production, the automated CNC production line can realize 24-hour continuous operation, which is more than 3 times more efficient than traditional manual processing. The daily production capacity can reach hundreds of units, which can quickly respond to large-volume order demands, with short and guaranteed product delivery time;

4. High consistency in quality: Not only improving production efficiency, the numerical control production equipment has extremely high stability in the production process, effectively reducing human production errors. Whether in long-term continuous production or in the production of a large number of products of the same specification, it can ensure that the quality of each distribution box enclosure is highly consistent;

5. Beautiful workmanship: The distribution box enclosures processed by numerical control equipment are very beautiful in appearance. The edges cut by the CNC punch are neat and smooth, requiring little post-polishing; the edges folded by the CNC bending machine are straight and clear, with smooth lines; combined with automatic welding equipment, the welds are uniform and beautiful, which not only improves the overall aesthetics of the enclosure but also enhances the protective performance of the product.

With its high precision, high efficiency, low error, and excellent appearance processing effect, numerical control production equipment has brought a great breakthrough to the production of distribution box enclosures. We can not only provide you with high-quality products but also guarantee the delivery time, so please feel free to purchase.

 

Maintenance Guide

 

1. Daily cleaning

Wipe the surface of the stainless steel box with a neutral detergent (pH 6-8) and a soft cloth. Avoid using steel wool or acidic solvents to prevent damage to the passive film.

Outdoor boxes should be cleaned once a quarter, and in coastal areas, the frequency should be increased to once a month, focusing on removing salt crystals in the gaps.

2. Inspection of sealing performance

Check the aging condition of the rubber strips of the distribution box door every year. If hardening or cracking occurs, they should be replaced in time (silicone rubber or fluororubber is recommended).

After rain, observe whether there are water seepage traces inside the box. The compression amount of the sealing rubber strip should be maintained at 1/3-1/2 of the original thickness.

3. Electrical performance testing

Test the grounding system with a grounding resistance tester every two years (standard ≤4Ω). If the resistance value is abnormal, check whether the grounding terminal is oxidized or loose.

For equipment operating in high-temperature environments (≥300℃), use an infrared thermometer to monitor the surface temperature of the stainless steel box every six months to ensure that the heat dissipation holes are not blocked.

 

Product Customization Support

 

Distribution box enclosures are customizable products, and both size and material can be flexibly customized.

1. In terms of enclosure size, we can provide accurate personalized size solutions according to your actual installation space and internal component layout requirements, which can be adapted to the narrow space of compact equipment at the smallest and meet the integration needs of large industrial projects at the largest, ensuring a perfect fit with the on-site environment.

2. In terms of material selection for distribution box enclosures, we can provide a variety of high-quality materials, such as:

(1)High-strength cold-rolled steel sheets, which have excellent mechanical strength and durability, suitable for conventional industrial environments;

(2)Stainless steel materials (such as 304 stainless steel), which have excellent corrosion resistance, especially suitable for highly corrosive places such as coastal areas and chemical workshops;

(3)Aluminum alloy materials, with the characteristics of light weight and good heat dissipation performance, are ideal choices for scenarios with high requirements on installation convenience and heat dissipation.

3. The configuration of the distribution box enclosure (such as door panels, box body, sealing strips, mounting plates, door locks, hanging rings, grounding sleeves), color, and plate thickness all support customization.

Our professional team will provide the most suitable customized distribution box enclosure solutions according to your usage scenarios, protection requirements, and budget, comprehensively meeting diverse needs.

 

FAQ

 

Q: What is the difference between 304 stainless steel and 316 stainless steel? How to choose?

A: 304 stainless steel: contains 18% chromium and 8% nickel, has good corrosion resistance and processability, and is suitable for ordinary industrial environments (such as dry, weak acid and weak alkali scenarios).

316 stainless steel: added with 2% molybdenum, which significantly improves the resistance to chloride ion corrosion, and is suitable for highly corrosive environments such as marine and chemical industries (such as seawater, acid mist, salt spray).

 

Q: How is the corrosion resistance of the STAINLESS STEEL ENCLOSURE tested?

A: Salt spray test: simulating the marine environment, the test standard is ASTM B117 (for example, 316 stainless steel needs to pass ≥96 hours of testing without rust).

Chemical immersion test: immerse the sample in a specific acid-base solution (such as 5% sulfuric acid, 10% hydrochloric acid) and observe the surface changes.

 

Q: Is the STAINLESS STEEL ENCLOSURE suitable for high or low-temperature environments?

A: Yes, it is suitable.

High-temperature environment: stainless steel can withstand temperatures up to 800℃ (short-term), and it is recommended to use it at ≤300℃ for long-term use;

Low-temperature environment: it remains tough at -60℃, suitable for cold storage, polar equipment, etc.

Note: For extreme temperatures, it is necessary to use temperature-resistant sealing rings (such as fluororubber).

 

Q: What should be paid attention to when installing the STAINLESS STEEL ENCLOSURE?

A: 1.When installing the STAINLESS STEEL ENCLOSURE, avoid direct contact with carbon steel (to prevent electrochemical corrosion) and use insulating gaskets;

2.The grounding terminal must be reliably connected (grounding resistance ≤4Ω);

3.For outdoor installation, the box should be tilted by more than 5° for drainage.

 

Visit the Production Workshop of SDKC Distribution Box Enclosure

 

product-1269-952

 

Stainless steel enclosure distribution boxes strictly follow relevant national standards and industry specifications. The stainless steel plates are processed by high-precision cold rolling technology, with smooth and flat surfaces, excellent hardness and toughness. Then, through CNC laser cutting, bending, welding and other processes, a strong and durable box structure is created. Each welding point is strictly inspected to ensure the sealing and strength of the box, providing a safe and stable operating space for internal electrical components.

 

Hot Tags: stainless steel enclosure, China stainless steel enclosure manufacturers, suppliers, factory, fiberglass box, stainless steel electrical cabinet, 304 stainless steel enclosure, wall mounted rack enclosure, stainless steel outdoor enclosure, custom stainless steel enclosures


 

Send Inquiry