Molded Case Residual Current Circuit Breaker 4P
Description
Technical Parameters
Product Structure Introduction
The Molded Case Residual Current Circuit Breaker 4P consists of several key components that work together to ensure its stable performance and powerful functions.
1. Sturdy Molded Case: The outer shell of the Molded Case Residual Current Circuit Breaker 4P is made of high-strength insulating material with excellent flame-retardant properties. The molded case not only provides reliable physical protection for the internal precision electrical components, shielding them from external impact and environmental factors, but also has excellent electrical insulation performance. It effectively isolates live parts, building the first line of defense for the personal safety of operators.
2. High-performance Contact System: The contact system is responsible for connecting and disconnecting the circuit. It is meticulously manufactured using metal materials with high electrical conductivity and wear resistance. This design ensures that during frequent switching operations, the contacts can always maintain good contact performance and stable conductivity, effectively reducing contact resistance and energy loss, and prolonging the service life of the product.
3. Efficient Arc Extinguishing Device: When the contacts break the current, a strong arc will be generated, which may cause serious damage to the contacts and the surrounding environment. The function of the arc extinguishing device is to quickly extinguish these arcs. Through a special structural design and arc extinguishing materials, the energy of the arc is quickly dissipated, ensuring the reliable operation of the residual current circuit breaker and improving the safety and stability of the equipment.
4. Intelligent Release: As the core protection component of the circuit breaker, the release includes overcurrent release, undervoltage release, and residual current release, etc. These releases can accurately detect fault signals such as overload, short circuit, undervoltage, and leakage in the circuit, and quickly respond by triggering the residual current circuit breaker to cut off the circuit, realizing comprehensive protection of the power system.
5. Flexible Operating Mechanism: The operating mechanism provides users with various operation modes. It supports manual operation of the handle for switching on and off, which is simple, direct, convenient, and quick in small-scale power distribution places or when emergency manual intervention is required.
At the same time, it can be equipped with an electric operating mechanism to meet the needs of remote control and automatic operation in modern intelligent buildings and industrial automation control systems. Through instructions from the monitoring center, the Molded Case Residual Current Circuit Breaker 4P can quickly and accurately perform switching operations, greatly improving the management efficiency of the power system.
6. Precise Leakage Protection Module: It focuses on the accurate detection and rapid processing of leakage current, with extremely high precision and sensitive response speed. Whether it is an extremely small leakage current or a sudden large leakage, this module can promptly capture and quickly transmit signals, ensuring that the residual current circuit breaker cuts off the circuit in the shortest time to protect the safety of personnel and equipment.
Appearance and Installation Dimensions

|
Type |
Poles |
Overall dimensions (mm) |
Installation size (mm) |
||||||||||||||
|
L |
L1 |
L2 |
W |
H |
H1 |
H2 |
H3 |
a |
a1 |
a2 |
b |
b1 |
b2 |
Φd |
Φd1 |
||
|
KCM1L-1250 |
3 |
330 |
466 |
68 |
210 |
190 |
139 |
15 |
45 |
70 |
70 |
107 |
300 |
370 |
436 |
95 |
129 |
|
4 |
330 |
466 |
68 |
280 |
190 |
139 |
15 |
45 |
70 |
70 |
107 |
300 |
370 |
436 |
95 |
129 |
|
Technical Parameters
|
Number of poles |
2(1+N)P,4(3+N)P; |
|
Rated current |
6A,10A,16A,20A,25A,32A,40A,50A,63A. |
|
Rated voltage |
~400-600V |
|
Frequency |
~50/60 Hz |
|
Rated insulation voltage |
500V |
|
Rated breaking capacity |
6KA |
|
Ambient temperature |
-20℃~+60℃ |
|
Installation method |
Embedded installation (back rail installation) |
|
Mechanical life |
20000 times |
|
Electrical life |
2000 times |
|
Aspect |
2(1 + N)P: 4(3 + N)P: |
Product Usage and Maintenance
1. Installation Points: The Molded Case Residual Current Circuit Breaker 4P should be installed by professional electricians in accordance with electrical specifications. When installing in a distribution box, ensure that the live wire, neutral wire, and ground wire are connected correctly. After installation, strict testing is required to verify that the leakage protection function is working properly.
2. Daily Inspection: To ensure that the residual current circuit breaker is always in good working condition, it is recommended to press the test button on it monthly for inspection. If the circuit breaker does not trip after pressing the button, it indicates that the leakage protection function may be faulty, and the equipment should be replaced in a timely manner to ensure electrical safety.
FAQ
Q: What is the difference between the Molded Case Residual Current Circuit Breaker 4P and the 3P molded case residual current circuit breaker?
A: 1. Different wiring methods: The Molded Case Residual Current Circuit Breaker 4P is connected to a three-phase four-wire system (L1/L2/L3/N) and controls the on-off of three live wires and the neutral wire at the same time; the 3P molded case residual current circuit breaker is connected to a three-phase three-wire system (L1/L2/L3) and only controls the on-off of three live wires.
2. Different neutral wire control: The Molded Case Residual Current Circuit Breaker 4P can cut off the neutral wire at the same time, avoiding safety hazards caused by abnormal neutral wire current (such as overload caused by harmonics and three-phase imbalance), and is suitable for scenarios that require complete electrical isolation (such as preventing reverse power transmission during maintenance).
For 3P: The neutral wire is always connected and cannot be disconnected. If the system neutral wire fails (such as grounding or disconnection), it may cause equipment abnormalities or failure of the leakage protection.
Q: How to install and wire the Molded Case Residual Current Circuit Breaker 4P?
A: Generally speaking, the incoming end of the Molded Case Residual Current Circuit Breaker 4P is connected to the three-phase live wires and the neutral wire, and the outgoing end is connected to the corresponding lines on the load side. During installation, ensure that the circuit breaker is installed firmly and wired correctly, and follow relevant electrical installation specifications. At the same time, pay attention to distinguishing the terminals with different functions to avoid incorrect wiring, which may cause the circuit breaker to fail to work normally or cause safety hazards. For draw-out circuit breakers, they should be correctly installed on the draw-out base in accordance with the operation instructions, and ensure that the connections of the main circuit and the secondary circuit are reliable.
Q: How to test whether the leakage protection function of the Molded Case Residual Current Circuit Breaker 4P is normal?
A: Usually, a dedicated leakage testing instrument can be used. When the residual current circuit breaker is in the closed state, simulate a leakage fault and observe whether the circuit breaker can trip within the specified time. You can also press the test button on the Molded Case Residual Current Circuit Breaker 4P to perform manual tests regularly to check whether the leakage protection function is effective. If the residual current circuit breaker fails to trip normally during the test, it indicates that there may be a problem with the leakage protection function, and it needs to be repaired or replaced in a timely manner.
Q: What is the function of the residual current circuit breaker?
A: The residual current circuit breaker is mainly used to detect leakage (current leakage) in the circuit and quickly cut off the power supply when leakage occurs to prevent electric shock accidents or electrical fires. It can also provide overload and short-circuit protection.
Q: What is your delivery time?
A: Depending on the order quantity, delivery can usually be completed within 12 days after receiving the deposit. We have an efficient production process and a complete supply chain system to ensure that we can provide customers with high-quality products on time.
Q: What is the difference between a molded case residual current circuit breaker and an ordinary circuit breaker?
A: On the basis of having the overcurrent protection function of ordinary circuit breakers, the molded case residual current circuit breaker additionally has a leakage protection function. It can detect the leakage current in the circuit and quickly cut off the circuit when the leakage current reaches the set value, thereby effectively preventing electric shock accidents. It can be said that the molded case residual current circuit breaker provides more comprehensive power protection, and is especially suitable for places with high requirements for personal safety and leakage protection, such as homes, hospitals, schools, etc.
Visit the Production Workshop of SDKC Circuit Breaker

Welcome to visit our SDKC production workshop, where advanced automated equipment runs through the entire production process. Automated equipment can precisely control every link in the production process, which greatly improves the stability of product quality compared with traditional manual welding. An advanced assembly robot can complete the assembly of hundreds of residual current circuit breakers per hour, and its production efficiency is several times that of manual work. This not only effectively reduces production costs, but also ensures that products can be launched on the market at a more competitive price. We always adhere to a strict quality control system. From raw material procurement to finished product delivery, every link undergoes multiple strict inspections, just to provide customers with high-quality and high-performance Molded Case Residual Current Circuit Breaker 4P.
Hot Tags: molded case residual current circuit breaker 4p, China molded case residual current circuit breaker 4p manufacturers, suppliers, factory, earth circuit leakage breaker, elcb breaker, RCBO, automatic elcb, leakage current circuit breaker, rccb circuit breaker
Previous
No InformationSend Inquiry







