Explosion-proof Wall-mounted Distribution Box
Description
Technical Parameters
Product Introduction
● The Explosion-proof wall-mounted distribution box is made of high-strength cast aluminum alloy or 304 stainless steel, formed through special processing techniques. The joint surface of the box body is precision ground, with the gap strictly controlled between 0.1 - 0.2mm and the length not less than 25mm, forming a solid flameproof structure. When an explosion occurs inside the box due to electrical faults or other reasons, the flameproof surface can effectively prevent the leakage of flame, high-temperature and high-pressure gas, and avoid the spread of explosion to the surrounding dangerous environment.
● The surface of the Explosion-proof distribution box is subjected to special explosion-proof spraying treatment, with the coating thickness reaching 120 - 150μm, which not only enhances the corrosion resistance but also further improves the explosion-proof performance.
● The design of thickened explosion-proof hinges and high-strength explosion-proof door locks ensures the box body remains stable during long-term use. Even in environments with frequent switching and severe vibration, it can still maintain good explosion-proof sealing, ensuring the Explosion-proof distribution box operates continuously and reliably under various extreme working conditions, providing long-term protection for electrical safety.
Fine Details, Demonstrating Explosion-proof Craftsmanship
1. When the Explosion-proof distribution box is opened, the internal layout is reasonable and rigorous. Electrical components are installed in a modular manner, and the spacing is strictly calculated, which not only facilitates wiring and maintenance but also avoids electric sparks caused by too close distance between components.
2. The wires are explosion-proof flame-retardant cables, featuring low smoke, halogen-free, flame-retardant and other properties. The wire diameter is accurately configured according to the load current to ensure safe and stable power transmission.
3. The terminal blocks of the Explosion-proof distribution box adopt an explosion-proof sealing design, equipped with high-strength insulating protective covers and anti-loosening screws to prevent sparks caused by loose wiring due to vibration.
4. The interior of the Explosion-proof distribution box is provided with independent explosion-proof isolation chambers, which separate electrical components with different functions to further reduce the risk of explosion. The incoming and outgoing line holes are equipped with explosion-proof cable glands, which can effectively seal the cables and prevent explosive gases or dust from entering the box.
Product Features
● Unique wall-mounted design, flexible and convenient to install.
● Equipped with high-breaking small circuit breakers or molded case circuit breakers, and the internal electrical components can be arbitrarily matched and assembled according to your requirements.
● The product adopts a composite structure, the switch box adopts a flameproof structure, and the bus box and outlet box adopt an increased safety structure. All chambers are equipped with sealing rings, having good waterproof and dustproof functions.
● Cable or steel pipe wiring.
● The cabinet door, indicator light, buttons, instruments, incoming and outgoing line ports, etc., all adopt explosion-proof design.
Technical Parameters
● Rated voltage: Common ones are 220V, 380V, etc., and other voltage levels can also be customized according to actual needs.
● Rated current: The range is wide, from several amperes to hundreds of amperes, such as 6A, 10A, 16A, 100A, 250A, etc., which need to be selected according to the actual load current.
● Explosion-proof mark: Such as ExdeⅡBT6, ExdeⅡCT6, Ex tD A21 IP65, etc. Among them, Ex indicates explosion-proof, d indicates flameproof type, e indicates increased safety type, ⅡB and ⅡC indicate the category of explosive gas, and T6 indicates the temperature class.
● Protection level: Common ones are IP54, which has dustproof and splash-proof functions, suitable for outdoor or relatively harsh environments; IP65 has dustproof and waterproof functions, suitable for humid or open-air environments.
FAQ
Q: What are the advantages of the Explosion-proof wall-mounted distribution box?
A: The Explosion-proof wall-mounted distribution box adopts a wall-mounted design, which is flexible and convenient to install. It can be installed on walls, columns, etc. according to on-site needs, saving space and not affecting the site layout.
Q: What materials are generally used for Explosion-proof distribution boxes?
A: Steel plate, aluminum alloy, stainless steel, and can be customized according to your requirements.
Q: What daily inspections need to be done for explosion-proof electrical equipment?
A: Appearance inspection: Check whether the equipment shell is damaged, deformed, corroded, etc.
Fastening parts inspection: Check whether the fastening parts of the equipment are loose.
Cable entry device inspection: Check whether the sealing of the cable entry device is good and whether the cable is damaged.
Q: What are the classification of Explosion-proof distribution box levels?
A: Explosion-proof grades are usually classified in accordance with the standards of the International Electrotechnical Commission (IEC). Common classification of distribution box levels are:
1. Exd (d explosion-proof): Indicates an explosion-proof enclosure. In Exd grade distribution boxes, electrical equipment is installed in an explosion-proof enclosure. When an explosion occurs in the environment, the enclosure can withstand and prevent sparks or high-temperature gas from entering the external environment.
2. Exe (e explosion-proof): Indicates that the electrical equipment has enhanced protective performance and can effectively prevent the spread of sparks. This grade is usually used in places requiring spark prevention.
3. Exp (p explosion-proof): Refers to the protective performance of electrical equipment, which is mainly explosion-proof through external filling media (such as oil or resin).
4. Exi (i explosion-proof): Indicates that the internal circuit of the electrical equipment will not generate enough energy to cause an explosion under normal working conditions.
5. Exm (m explosion-proof) explosion-proof type, usually used in places where spark generation can be tolerated. This grade requires the internal structure of electrical equipment to be compact to prevent spark spread.
Visit the Production Workshop of SDKC Explosion-proof Distribution Box
During the production process, our Explosion-proof wall-mounted distribution box strictly follows international and domestic explosion-proof standards. Through special explosion-proof structure designs, such as flameproof type and increased safety type, it can effectively prevent the spread of internal explosion flames and high temperatures, and prevent the external dangerous environment from being ignited. At the same time, it has good sealing performance, with a protection level up to IP65 or higher, which can effectively block the intrusion of dust, rainwater and corrosive gases, providing a safe and stable operating environment for internal equipment.
Hot Tags: explosion-proof wall-mounted distribution box, China explosion-proof wall-mounted distribution box manufacturers, suppliers, factory, explosion proof pull box, Ex proof distribution box, box explosion proof, explosion proof single gang box, explosion proof electrical box, explosion proof box
Previous
No InformationSend Inquiry












