
Cabinet-Mounted Variable Frequency Drive
Description
Technical Parameters
Introduction to Internal Structure of the Product
As a core equipment in the field of industrial automation, the Cabinet-Mounted Variable Frequency Drive is widely used in high-power load scenarios such as chemical industry, mining, fans, water pumps, and compressors through precise speed regulation and efficient control of motors. The internal structure of the Cabinet-Mounted Variable Frequency Drive integrates technologies from multiple fields such as power electronics, control technology, and heat dissipation systems. The following will deeply analyze the structure and functions of the Cabinet-Mounted Variable Frequency Drive from multiple modules.
I. Main Circuit Module: The Core Hub of Electrical Energy Conversion
1. Rectifier Unit
The rectifier unit is the first checkpoint for the electrical energy input of the Cabinet-Mounted Variable Frequency Drive, usually composed of a diode or thyristor rectifier bridge. In the case of three-phase AC input, the diode rectifier bridge converts AC power with a voltage level of 380V or higher into DC power through full-wave rectification, providing a stable DC power supply for subsequent circuits. If thyristor rectification is adopted, it can also realize the energy feedback function, which can reversely transmit the regenerative electric energy of the motor to the power grid, improving energy utilization efficiency.
2. Filter Unit
The filter unit follows the rectifier unit and is mainly composed of large capacitors and reactors. Large-capacity electrolytic capacitors are used to smooth the DC bus voltage, reduce voltage ripples, and provide stable DC input for the inverter; reactors can suppress current harmonics, improve power factors, reduce harmonic pollution to the power grid, and ensure the stable operation of the Cabinet-Mounted Variable Frequency Drive.
3. Inverter Unit
The inverter unit is the key for the frequency converter to realize the frequency conversion function, which is composed of multiple power switching devices (such as IGBT modules) to form a three-phase bridge circuit. By controlling the turn-on and turn-off timing of IGBTs, DC power is inverted into three-phase AC power with adjustable frequency and voltage, driving the motor to achieve stepless speed regulation. For example, in fan speed regulation applications, the inverter unit can adjust the output frequency in real-time according to the actual air volume demand to precisely control the fan speed.
II. Control Circuit Module: The "Brain" of Intelligent Regulation
1. Control Chip
The control circuit is centered on a high-performance microprocessor (such as a DSP or ARM chip) and is responsible for executing complex control algorithms. By receiving external given signals (such as speed commands, torque commands) and combining the actual operating parameters fed back by the motor (such as speed, current, temperature), it calculates the optimal inverter switch control signal to realize vector control or direct torque control of the motor, ensuring the accuracy and stability of motor operation.
2. Drive Circuit
The function of the drive circuit is to amplify the weak electrical signal output by the control chip into a strong electrical signal sufficient to drive power devices such as IGBTs. At the same time, it also has an isolation protection function to prevent high voltage and large current in the main circuit from interfering with or damaging the control circuit, ensuring the safe operation of the system.
3. Detection Circuit
The detection circuit monitors the operating status of the Cabinet-Mounted Variable Frequency Drive in real-time, including current sensors, voltage sensors, temperature sensors, etc. The current sensor is used to detect the motor current to prevent damage due to overcurrent; the voltage sensor monitors the DC bus voltage and output voltage to ensure voltage stability; the temperature sensor monitors the temperature of power devices in real-time, and triggers a protection mechanism when the temperature is too high to avoid overheating and burning of the devices.
III. Auxiliary System Module: Guarantee for Stable Operation
1. Heat Dissipation System
During the operation of the Cabinet-Mounted Variable Frequency Drive, power devices will generate a lot of heat, so the heat dissipation system is crucial. Common heat dissipation methods include air cooling and liquid cooling. The air cooling system uses a high-power cooling fan to force convection to take away heat, which is suitable for medium and low-power frequency converters; the liquid cooling system uses cooling liquid circulation for heat dissipation, which has higher heat dissipation efficiency and is often used in high-power, high-density installed frequency converters, such as frequency converters for mine hoists.
2. Protection Circuit
The protection circuit provides multiple safety protections for the Cabinet-Mounted Variable Frequency Drive, including overvoltage protection, undervoltage protection, overcurrent protection, short-circuit protection, overheating protection, etc. Once an abnormal situation is detected, the protection circuit acts immediately, blocks the inverter drive signal, cuts off the main circuit power supply, prevents the expansion of faults, and sends out an alarm signal to facilitate operation and maintenance personnel to troubleshoot in time.
3. Communication Interface
Modern Cabinet-Mounted Variable Frequency Drives are usually equipped with multiple communication interfaces, such as RS485, Modbus, Profibus, etc., supporting data interaction with upper computers such as PLCs and industrial computers. Through the communication interface, functions such as remote monitoring, parameter setting, and fault diagnosis can be realized, which is convenient for integration into industrial automation control systems and improves the intelligence level of the system.
Product Features and Advantages
Five Core Technical Highlights of Cabinet-Mounted Variable Frequency Drives, Reshaping a New Height of Industrial Drive
In the context of accelerated upgrading of industrial automation, the performance of Cabinet-Mounted Variable Frequency Drives directly affects equipment energy efficiency and production stability. Our Cabinet-Mounted Variable Frequency Drives rely on five core technologies: RS485 communication, SVC vector control, all-round protection mechanism, intelligent self-tuning, and dual liquid crystal displays, providing efficient, safe, and intelligent solutions for industrial transmission systems.
I. RS485 Serial Communication Interface, Seamless Connection to Industrial Ecology
1. Using RS485 serial communication interface, combined with MODBUS international standard communication protocol, the Cabinet-Mounted Variable Frequency Drive realizes seamless interconnection with industrial equipment such as PLC, industrial computer, and DCS system. The RS485 interface has the characteristics of strong anti-interference ability, long transmission distance (up to 1200 meters), and support for multi-device networking (a single bus can connect 32 nodes), which can easily meet the signal transmission needs in complex industrial environments.
2. Through the MODBUS protocol, users can remotely read the operating parameters of the frequency converter (such as frequency, current, voltage), modify control commands in real-time, and quickly diagnose faults, which greatly improves system integration and operation and maintenance efficiency.
II. SVC Current Vector Control, Precise Drive Empowering Efficient Production
1. Using SVC (Static Vector Control) current vector control method, the Cabinet-Mounted Variable Frequency Drive breaks through the limitations of traditional V/F control, decouples the excitation current and torque current of the motor, and realizes independent and precise adjustment of motor speed and torque.
2. Combined with the V/F curve multi-point setting function, users can customize the voltage-frequency curve according to load characteristics (such as fans, water pumps, compressors) to adapt to different working conditions such as constant torque and variable torque. For example, in fan energy-saving transformation, by optimizing the V/F curve, the fan can still maintain stable operation at low speed, and the energy-saving efficiency is increased by more than 30% compared with traditional control methods; while in the start-up of heavy-duty equipment, SVC vector control can output 200% rated torque instantly to ensure stable start-up of the equipment and reduce mechanical impact.
III. Multi-Dimensional Protection System, Building a Solid Equipment Safety Line
1. The Cabinet-Mounted Variable Frequency Drive has a built-in comprehensive protection mechanism for all scenarios such as overcurrent, overvoltage, phase loss, overload, overheating, and short circuit, providing all-weather protection for the Cabinet-Mounted Variable Frequency Drive and the motor. When an abnormal current is detected (such as overcurrent caused by motor stalling), the system can quickly cut off the output within 10ms to avoid burning of the IGBT module;
2. Facing the overvoltage or undervoltage problems caused by grid voltage fluctuations, the protection circuit automatically adjusts operating parameters or shuts down for protection to ensure the safety of the equipment;
3. The phase loss protection function can monitor the status of the three-phase power supply in real-time to prevent motor damage caused by abnormal power supply. In addition, the system also has an automatic fault memory function, which records key parameters when a fault occurs, helping operation and maintenance personnel quickly locate the root cause of the problem and reduce downtime.
IV. Intelligent Self-Tuning Technology, One-Click Adaptation to Complex Working Conditions
The motor parameter self-tuning function completely solves the problem of complex debugging of traditional frequency converters. Users only need to start the self-tuning program through the operation panel, and the Cabinet-Mounted Variable Frequency Drive can automatically detect key parameters such as stator resistance, rotor resistance, and inductance of the motor, and store the data in the internal memory. This function is not only applicable to standard motors but also compatible with non-standard customized motors, ensuring the best matching between the frequency converter and the motor.
V. Dual LCD Digital Display, More Intuitive Human-Computer Interaction
1. The Cabinet-Mounted Variable Frequency Drive is equipped with dual LCD digital displays to realize synchronous visualization of operating parameters and operation interfaces. The main display screen displays the core operating data of the frequency converter in real-time (such as output frequency, current, voltage, speed), supporting multi-unit switching (Hz, A, V, rpm);
2. The secondary display screen is used for parameter setting and fault code display. With an intuitive menu navigation system, users can quickly complete function configuration.
3. The dual-screen design makes the operation interface simple and easy to understand, even non-professionals can quickly get started. At the same time, the screen has a backlight adjustment function to adapt to different lighting environments, ensuring clear visibility of data and improving operation convenience and equipment monitoring efficiency.
These five core technologies work together to make the Cabinet-Mounted Variable Frequency Drive have high efficiency, intelligent control, and reliable safety. Whether it is the upgrading of traditional manufacturing industries or high-precision fields such as new energy and intelligent manufacturing, it can create significant value for users. If you want to know more about the practical application cases or technical details of a certain technology, please feel free to communicate!
Technical Parameters and Installation Dimensions
|
Model Specification |
Rated Output Current (A) |
Adapted Motor Power (kw) |
Height H * Width W * Thickness D (mm) |
Remarks |
|
|
KG300A-45G/55P |
50/65 |
45/55 |
655*270*315 |
Incoming line mode: bottom-in and bottom-out |
|
|
KG300A-55G/75P |
65/86 |
55/75 |
|||
|
KG300A-75G/90P |
86/100 |
75/90 |
|||
|
KG300A-90G/110P |
100/120 |
90/110 |
745*325*350 |
||
|
KG300A-110G/132P |
120/150 |
110/132 |
|||
|
KG300A-132G/160P |
150/175 |
132/160 |
830*380*335 |
Cabinet unit with built-in DC reactor |
|
|
KG300A-160G/200P |
175/215 |
160/200 |
|||
|
KG300A-200G/220P |
215/245 |
200/220 |
1025*525*350 |
||
|
KG300A-220G/250P |
245/260 |
220/250 |
|||
|
KG300A-250G/280P |
260/299 |
250/280 |
|||
|
KG300A-280G/315P |
299/330 |
280/315 |
|||
|
KG300A-315G/355P |
330/374 |
315/355 |
1150*555*355 |
||
|
KG300A-355G/400P |
374/410 |
355/400 |
|||
|
KG300A-400G/450P |
410/465 |
400/450 |
1450*650*390 |
||
|
KG300A-450G/500P |
465/550 |
450/500 |
|||
|
KG300A-500G/560P |
550/575 |
500/560 |
|||
|
KG300A-560G/630P |
575/680 |
560/630 |
1600*750*500 |
||
|
KG300A-630G/710P |
680/712 |
630/710 |
|||
|
KG300A-710G/800P |
712/802 |
710/800 |
|||
|
KG300A-800G/900P |
802/897 |
800/900 |
|||
|
KG300A-900G/1000P |
897/1008 |
900/1000 |
1855*1000*800 |
||
|
KG300A-1000G/1100P |
1008/1164 |
1000/1100 |
|||
|
KG300A-1100G/1200P |
1164/1201 |
1100/1200 |
|||
|
KG300A-1200G/1300P |
1201/1310 |
1200/1300 |
|||
|
Note: The panel opening size of KG300A series is 133.5mm in height and 87.5mm in width |
|||||
FAQ
Q: What electrical safety precautions should be taken when installing the Cabinet-Mounted Variable Frequency Drive?
A: The Cabinet-Mounted Variable Frequency Drive must be disconnected from the power supply before installation to avoid the risk of electric shock. When wiring, strictly distinguish the input power line (usually connected to the grid side) and the output line (connected to the air-conditioning motor) according to the instruction manual. They must not be connected reversely, otherwise, the frequency converter will be burned. Ensure that the grounding terminal is reliably grounded, and the grounding resistance should be less than 4Ω to prevent electric leakage from endangering personal safety and the stable operation of the equipment.
Q: What is the maximum KW of the Cabinet-Mounted Variable Frequency Drive you can provide, and what is the minimum power of your Cabinet-Mounted Variable Frequency Drive?
A: The maximum power of our Cabinet-Mounted Variable Frequency Drive can reach 1200KW-1300KW.
The minimum power can be 45KW and above.
Q: What daily maintenance work is required for the Cabinet-Mounted Variable Frequency Drive?
A: 1. Monthly inspection:
- Clean the air duct filter screen (for air-cooled models);
- Check the temperature inside the cabinet and the operation status of the fan;
- Record the operating current and voltage fluctuations.
2. Annual maintenance:
- Tighten the power/control terminals;
- Inspect the capacitor capacity and the condition of the heat sink thermal paste;
- Calibrate the accuracy of voltage/current sensors.
Q: How do you ensure product quality?
A:Every product manufactured in our factory undergoes strict testing procedures. It must be 100% qualified in quality before delivery. We believe in, respect, and strive to do our best.
Q: What is the protection level of your variable frequency drives?
A:The protection level of our variable frequency drives is IP65, which can be completely dust-tight and resist high-pressure water jets.
Visit SDKC's Frequency Converter Production Workshop

The Cabinet-Mounted Variable Frequency Drive is the "heart" of industrial heavy-duty drives. With its high-performance raw material configuration, customized cabinet design, and excellent heavy-load performance, it has become the cornerstone for the stable operation of large-scale industrial systems. As a manufacturer of electronic components, we always adhere to the concept of "customization on demand + reliability first", providing full-link solutions from power modules to cabinet structures, helping customers in industries such as metallurgy, chemical engineering, and energy achieve efficient drive and intelligent control. Choose our Cabinet-Mounted Variable Frequency Drive to make every heavy-load startup stable and powerful, injecting reliable power into your industrial system.
Hot Tags: cabinet-mounted variable frequency drive, China cabinet-mounted variable frequency drive manufacturers, suppliers, factory, VFD, vfd drives near me, three phase motor protection, variable frequency drive phase converter, variable speed drive controller, inverter speed controller
Send Inquiry






