Installation Method Of Distribution Box

Dec 13, 2025

Leave a message

The installation of the distribution box is a very important part of electrical construction, which is related to the safety, aesthetics, and subsequent maintenance of the entire circuit system, as well as the safety of people and property. It is recommended that the installation be carried out by a qualified professional electrician.

news-1-1

I. Main Installation Methods

The installation methods of distribution boxes are mainly distinguished based on their structure, usage scenario, and relationship with the wall:

1. Classification by Installation Location
Indoor Boxes: Installed in indoor locations such as residences and offices, usually using recessed or wall-mounted methods, emphasizing aesthetics.

Outdoor Boxes: Installed on building exterior walls, in electrical rooms, and other outdoor locations, requiring high waterproof, dustproof, and corrosion-resistant ratings (high IP rating), usually wall-mounted or floor-standing.

 

2. Classification by Relationship with the Wall
Concealed (Embedded)
Description: The distribution box is completely or partially embedded in the wall, with only the panel exposed, flush with the wall surface.

Advantages: Aesthetically pleasing, space-saving, does not affect furniture placement, the most common method in home decoration.

Disadvantages: More complex construction, requires drilling holes in the wall, strict requirements on box dimensions, inconvenient for later replacement or expansion.

Applicable to: Newly built residences, brick or concrete walls under renovation.

 

Surface Mounted (Wall-mounted/Surface-mounted)

Description: The distribution box is directly fixed to the wall, protruding from the wall surface.

Advantages: Easy installation, no wall opening required, easy inspection, maintenance, and expansion.

Disadvantages: Less aesthetically pleasing, takes up indoor space, may affect furniture layout.

Suitable for: Old house renovations, brick-concrete structures with walls where grooving is inconvenient, machine rooms, warehouses, temporary power supply, etc.

 

Floor-mounted

Description: The box is fixedly installed on a base on the ground, usually a larger distribution cabinet or control cabinet.

Advantages: Large capacity, easy equipment layout and heat dissipation, large maintenance and operation space.

Disadvantages: Large footprint.

Suitable for: Main distribution cabinets in factory workshops, power distribution rooms, and large commercial venues.

 

II. Core Precautions and Safety Regulations

Professional Construction: Must be performed by a qualified professional electrician; unauthorized installation by non-professionals is strictly prohibited.

Safety Isolation: Before work, all related power sources must be confirmed and disconnected, implementing a "power off, voltage test, and signage" system.

Branch Circuits and Protection: Branch circuit control is mandatory. High-power appliances such as lighting, sockets, air conditioners, and kitchen appliances should have independent circuits. Sockets in damp locations must be equipped with residual current devices (RCDs).

Grounding: The grounding wire must be reliably connected and must not pass through any switches. This is the lifeline for preventing electric shock.

Specification Matching: The conductor cross-section and switch rated current must match the load, with a margin of safety. It is forbidden to use a small switch to power a large load.

Fireproofing: Gaps between the enclosure and conduit, and where conduits pass through floors and walls, must be sealed with fire-resistant sealant to prevent the spread of fire.

Spare Space: Approximately 20% space should be reserved inside the enclosure for heat dissipation and future expansion.

Send Inquiry