What Is The Difference Between RCD And MCB?

Jul 12, 2025

Leave a message

What is the difference between RCD and MCB?

 

RCD (Residual Current Device) and MCB (Miniature Circuit Breaker) are both important protective devices in low-voltage power distribution systems, but their protection principles, functions and application scenarios are significantly different. The following is a detailed comparison of the differences between the two from multiple dimensions:


I. Core Definition and Protection Principle


1. MCB (Miniature Circuit Breaker)
- Based on overload and short-circuit current trigger protection.
- Principle: When the current in the circuit exceeds the rated value (overload) or a large instantaneous current (short circuit) occurs, the internal thermal release (overload protection, using the thermal expansion and bending of the metal sheet) or electromagnetic release (short circuit protection, using electromagnetic force to push the release mechanism) will act to cut off the circuit to prevent the line and electrical appliances from burning due to overheating or causing a fire.

 

2. RCD (Residual Current Device)
- Based on residual current (leakage current) trigger protection, the core is to ensure personal safety.
- Principle: By detecting the current difference between the live wire and the neutral wire (under normal circumstances, the currents of the two are equal and opposite, and the difference is 0). When leakage occurs (such as when a person touches the live wire, part of the current flows into the earth through the human body), the live wire current will be greater than the neutral wire current, generating "residual current". When the residual current exceeds the set value (usually 30mA), the RCD will quickly cut off the circuit (action time ≤ 0.1 seconds) to avoid human electric shock casualties.

 

Ⅱ. Main functions and protection objects


- MCB
⑴ Core function: prevent equipment/line damage caused by overload and short circuit
⑵ Protection objects: lines, electrical equipment (property protection)
⑶ Unable to protect: does not detect leakage (even if the leakage current is very small, as long as there is no overload/short circuit, MCB will not act)


- RCD
⑴ Core function: prevent personal electric shock accidents caused by leakage
⑵ Protection object: human body (life safety protection)
⑶ Unable to protect: does not directly protect against overload and short circuit (need to be used with MCB)

 

Ⅲ. Action parameters and response speed


- MCB:
- Rated current (such as 10A, 16A, 20A, etc.): indicates the maximum current allowed to pass for a long time. If it exceeds this value and lasts for a certain period of time (overload), it will trip.
- Short-circuit current: The action current is much larger than the rated current (usually 5-10 times the rated value), and the response time is relatively slow (millisecond level, but longer than RCD).

 

- RCD:
- Rated residual operating current (such as 30mA, 100mA): When the leakage current reaches this value, it must act (30mA is the human safety threshold, and the circuit can be cut off before the fatal current passes).
- Extremely fast response speed (≤0.1 second): Ensure that the current and time product (I×t) passing through the human body when electric shock does not exceed the fatal value (50mA×1 second).

 

IV. Application scenarios


- MCB:
As the "first line of defense" of the power distribution system, it is installed in each branch of the distribution box (such as lighting, sockets, and air conditioning circuits) to protect the lines and electrical appliances of the branch from overload and short circuit. For example: A 20A MCB is used in the air conditioning circuit to prevent overload or internal short circuit when the air conditioner is started.


- RCD:
Mainly used for circuits with risks of electric shock, such as socket circuits (especially in humid environments such as bathrooms and kitchens), handheld power tool circuits, etc. It is usually used in combination with MCB (such as RCBO, i.e. RCD with overload/short-circuit protection), which can prevent both leakage and overload/short-circuit.

 

V. Typical combinations and complementary relationships


In actual power distribution systems, the two are usually used together:
- MCB is responsible for overload and short-circuit protection of lines and equipment;
- RCD is responsible for leakage protection, making up for the shortcomings of MCB in personal safety protection.
- The common "RCBO (residual current operated circuit breaker)" is an integrated product of the two, which has the functions of MCB and RCD at the same time, simplifying the power distribution design.

 

Summary


MCB is a "equipment bodyguard" to prevent lines and electrical appliances from being damaged due to excessive current; RCD is a "life guard" to prevent personal electric shock caused by leakage. The functions of the two are complementary and indispensable, and together they constitute the safety protection system of the low-voltage power distribution system.

 

news-800-800news-800-800

Send Inquiry