When Using Electrical Equipment, What Protective Measures Should Be Taken On The Enclosure?
Sep 28, 2023
Leave a message
Its shell should have protective zero connection or grounding protection measures.
Basic requirements for electrical equipment in terms of safety technology
Electrical accident statistics show that a large proportion of accidents are caused by structural defects of electrical equipment, poor installation quality, and failure to meet safety requirements. Therefore, in order to ensure the safety of people and equipment, there are the following requirements for electrical equipment in terms of safety technology:
(1) Reliable protective measures should be taken for live equipment that is exposed on the ground and easily accessible to people.
(2) A certain safe distance should be maintained between the live parts of the equipment and the ground and other live parts.
(3) Power systems that are prone to overvoltage should have overvoltage protection devices such as lightning rods, lightning protection wires, arresters, and protection gaps.
(4) The low-voltage power system should have grounding and zero protection devices.
(5) Different types of protection measures such as installing high-voltage fuses and circuit breakers should be adopted for various high-voltage electrical equipment; corresponding low-voltage electrical protection measures should be adopted for low-voltage electrical equipment.
(6) Safety signs should be installed at the installation location of electrical equipment.
(7) Depending on the characteristics and requirements of certain electrical equipment, special safety measures should be taken.
Extended information:
Electrical fires are usually caused by overheating due to factors such as aging insulation, loose connections, overloading or short circuits in electrical equipment. Especially in flammable and explosive places, the above-mentioned hidden dangers of electrical circuits are more harmful. To prevent electrical fire accidents, fire prevention measures must be taken.
(1) Frequently check the operation of electrical equipment, check whether the joints are loose, whether there are sparks, whether the overload and short-circuit protection devices of the electrical equipment are reliable, and whether the equipment insulation is good.
(2) Reasonable selection of electrical equipment. In places where there are flammable and explosive items, when installing and using electrical equipment, explosion-proof electrical appliances should be used, and insulated wires must be laid sealed in steel pipes. Electrical equipment should be selected and installed according to the level of explosion hazard locations.
(3) Maintain a safe installation location. Maintaining the necessary safety distance is one of the important measures for electrical fire prevention. In order to prevent fires caused by electrical sparks and dangerous high temperatures, flammable and explosive materials should not be stacked around electrical equipment that can produce sparks and dangerous high temperatures.
(4) Keep electrical equipment operating normally. Sparks and dangerous high temperatures generated during the operation of electrical equipment are important causes of electrical fires. In order to control excessive working sparks and dangerous high temperatures and ensure the normal operation of electrical equipment, it should be operated, used and maintained by trained and qualified personnel.
(5) Ventilation. Electrical equipment operating in flammable and explosive hazardous locations should have good ventilation to reduce the concentration of explosive mixtures. Its ventilation system should meet relevant requirements.
(6) Ground. Grounding requirements in flammable and explosive hazardous places are higher than in ordinary places. Regardless of its voltage level, normally uncharged devices should be reliably grounded in accordance with relevant regulations.
Fire fighting rules
(1) When a fire occurs in electrical equipment, the electrical appliances and lines on fire may be charged. In order to prevent the spread of the fire and electric shock accidents during fire extinguishing, the power supply should be cut off immediately when an electrical fire occurs.
(2) Because production cannot be stopped, or power outage is not allowed due to other needs, when the fire must be put out with electricity, non-conductive fire extinguishing agents must be selected, such as carbon dioxide fire extinguishers, 1211 fire extinguishers, difluorodibromomethane fire extinguishers, etc. Firefighters must wear insulating shoes and gloves when putting out a fire.
(3) The shortest distance when extinguishing a fire. When using non-conductive fire extinguishing agents to extinguish fires, for 10kV voltage, the shortest distance from the nozzle to the charged body should not be less than 0.4m; for 35kV voltage, the shortest distance from the nozzle to the charged body should not be less than 0.6m. If water is used to extinguish the fire, the distance between the nozzle and the charged body must be more than 3m if the voltage is 110kV and above; if the voltage is 220KV and above, the distance should be no less than 5m.
