Why Does The Soft Starter Trip After Starting?

Mar 01, 2024

Leave a message

https://www.kaichuanpower.com/soft-starte/

If the motor trips when the motor is started by soft start, you need to know what fault is reported by the soft start, if it is a tripping circuit breaker, it may be that the current is large when starting. If the motor trips during the soft start operation, it may be the soft starter protection action, and it is necessary to confirm the motor load, whether it is the cause of overload or phase failure?

  1: The reason for the circuit breaker tripping when the soft starter starts the motor This tripping situation mostly occurs when starting and stopping, and it is necessary to recall whether it trips as soon as it starts or stops, or trips after a few seconds of starting or stopping.

  1) As soon as it starts or stops, it jumps, and the motor side should be checked for short circuit, mechanism jamming or stalling.

  2) Tripping during start or stop, the current is too large or the time is too long, and the set curve of circuit breaker tripping has been reached.

  2: The solution to the circuit breaker tripping when the soft starter starts the motor

  1) Readjust the set value of the circuit breaker so that the trip curve is greater than the starting current curve.

  2)Adjust the current limiting multiple of soft start so that the current is within the specified range.

  3)Reduce the start or stop time.

    There are only two kinds of things that happen: there are internal causes and external causes. If the newly installed soft starter trips immediately, external factors: it is necessary to check the motor, circuit, and supporting transformer, air open circuit breaker, contactor, etc., check the quality, and whether the capacity matches the soft starter. Then check the internal cause, whether there is a problem with the soft starter

Send Inquiry